trending ! Dont Tread On Me Punisher Car decal 3x4

Dont Tread On Me Punisher Car Decal 3x4
also do custom designs message me for details
1) Make sure the surface you have chosen to put the sticker on is clean and completely dry. Will stick top if you clean with rubbing alcohol.
2) Lay the decal down and rub over with a squeegee or credit card on the front and back; applying pressure. The popsickle stick include can be used also. This is important to make sure each parts of the graphic are stuck to the transfer tape.
3) Carefully peel off the backing layer. Only the vinyl and the clear thin transfer tape should remain. If any part of the graphic clings to the backing layer, lay that part back down and use your finger to press it back to adhere to the transfer tape. Peel the backing off again.
4) Apply to desired surface and slowly remove the clear top layer.
TIP: If you are having trouble getting the image to stick to the transfer tape, lay the sticker face down on a flat surface and roll back the backing while applying pressure